Our new design features a hand held sling sent free of charge with every cart for pets over 30 pounds! This new sling is made using our self-molding design and clips easily in and out of the cart. The pelvic support is designed by our on staff Veterinary Orthopedic Surgeon- Dr. Lincoln Parkes.

This cart is designed for any pet with strong forelimb strength and a willingness to get up and run around normally again. This cart is extremely light weight, adjusts with no tools required, and can be modified to accept front extensions for weakening front limb strength. The hips of the pet are aligned just behind the axle to balance the cart and alleviate virtually all joint pressure. Every cart for pets 30 pounds and up includes free of charge a hand held sling. This sling uses our new self molding system designed by an Orthopedic Veterinary Surgeon. The sling easily clips in and out of the cart with only the weight of your pet needed to lock the hips in and out of the cart. Slings are sent standard on every cart, so the rear legs can be held up off of the ground to protect against paw injury or left down if the pet is still able to walk. The slings flex with the natural movement of the legs, so having the legs held up in no way retards rehabilitation.

To see a pet using this design: Picture Click Here! Videos Click Here!

All Carts require 8 measurements to be taken before we can proceed with the order. To view the measuring diagram: Please click here

Front extension carts are used on all pets that are starting to weaken in the front limbs and need a little extra support. The wheels are spring tensioned castors that rotate and flex as the pet moves over both smooth or uneven surfaces. The extensions can be attached and removed from the cart in seconds with no tools required. This allows your pet the option of the extra support or not depending on how they are feeling on a given day. To see a picture of a pet using this design: Please click here

All Carts require 8 measurements to be taken before we can proceed with the order. To view the measuring diagram: Please click here

The fully supportive cart is used for pets with general weakness in all four limbs. This cart uses our custom molding support system in the rear as well as the front for equal support in the pelvis as well as the chest. These carts are all unique depending on your pet's specific needs. To see a picture of a pet using this design: Please click here

All Carts require 8 measurements to be taken before we can proceed with the order. To view the measuring diagram: Please click here

The front limb cart is used for pets with a disability associated only with the front limbs. This includes pets with birth defects, and amputees. The chest of the pet is supported in contoured foam rings, or in the case of an amputee or double amputee; a solid contoured foam system made specifially for your pet. The axle of the cart is built to flex with your pets movements on a spring loaded rocker arm.

All Carts require 8 measurements to be taken before we can proceed with the order. To view the measuring diagram: Please click here

Specialty carts are our business, and no one in the field of handicapped pets has designed or built more carts for pets with special needs than our staff. Our new materials let us make up a support system for virtually any mobility problem from front amputees to exotics. These carts are each evaluated, designed, and priced differently as each case is very unique. If you have a need for a cart that is not mentioned in the standard designs above please contact us with your pet's specific needs, and we will do our best to get your pet up and running around again.

Cart Cost will be determined by the K-9 Carts staff once a cart has been designed. We will not begin manufacturing the cart until you have been notified of the price and it has been agreed upon. For a specialty cart you will need to fill out a form of your pet's health and mobiltity in detail: Please click here