Assemble My K9 Carts Wheelchair
K9 Carts wheelchair assembly and adjustment for the Fully Supportive Wheelchair or the Rear Support Wheelchair designs are shown below. Please make sure you check to see if you have a Full or Rear support wheelchair and then look at the appropriate instructions below. We recommend for all of our clients to send in photos of their pet in the cart for our staff to review.
Assembly of the Rear Support Wheelchair
The Rear Support Wheelchair requires minimal assembly. An Allen wrench is the only tool required for assembly, and is provided along with written assembly instructions. Your cart will arrive in two parts (main frame and set of wheel blades with wheels). Assembling the cart is a simple process if you follow the instructions. Please click on the link below to view the assembly instructions online.

Assembly of the Full Support Wheelchair
The Fully Supportive Wheelchair requires some assembly. An Allen Wrench is required, and is provided along with written assembly instructions. You will also need a standard Philips Head screwdriver (it is not provided). Your Fully Supportive Cart will arrive in the box in three to four parts depending on the size (main frame, set of wheel blades with wheels, front extension, and sometimes the bracing bar will be separate from the front extension unit). Assembling the cart is easy as long as the instructions are followed. Please click on the link below to view the assembly instructions online.
